Welcome to Wuxi Weibang Transformer Manufacture Co., Ltd.
customized core 2
Product Introduction:

Material Property:  CRGO&CRNGO

Material Brand:  Baosteel, NSC, JFE, TKS, POSCO, NLMK

Material Thickness:  0.05mm, 0.08mm, 0.1mm, 0.23mm, 0.27mm, 0.3mm, and 0.35mm.

Certificate:  RoHS 2011/65/EU

Technics:  tape winding

Products Frequency:  50-5K HZ

Products Shapes:  C E O & Customized

Mechanical Properties:  low power loss per cycle / low core loss / high permeability

Application:  transformer, sensor and magnetic components of electronic equipment; Automobile Sensor, Solar Inverter, Smart Home

Tel:86 510 86179301
Product Description
WeldingSpot welding is firm and smooth, and does not weld through two layers
Windingwinding is tight, the start and end of the sheet can not be turned up
Planenesssurface unevenness is less than 0.1mm
FinenessNo crystalline fine particles (no crystalline fine particles on the cut surface)
Cut faceNo obvious crack on the cutting face (no light transmission and peeling between layers)
SurfaceVisually without burrs, rust, or deformation (to control deformation within tolerances)
ProductsDo not contain Pb\Cd\Hg\Cr\PBBs\PBDEs

More Pictures
Leave message