Welcome to Wuxi Weibang Transformer Manufacture
+86-510-86179301
Epoxy Coat
Your Current Location:
Epoxy CoatEpoxy Coating Core
Epoxy Coating Core

Product Introduction:

O

Epoxy Resin Coating thickness nominal 0.3mm 


Tel:+86-510-86179301

Email:[email protected]


  • Material Property:  CRGO&CRNGO

    Material Brand:  Baosteel, NSC, JFE, TKS, POSCO, NLMK

    Material Thickness:  0.05mm, 0.08mm, 0.1mm, 0.23mm, 0.27mm, 0.3mm, and 0.35mm.

    Certificate:  RoHS 2011/65/EU

    Technics:  tape winding

    Products Frequency:  50-5K HZ

    Products Shapes:  C E O & Customized

    Mechanical Properties:  low power loss per cycle / low core loss / high permeability

    Application:  transformer, sensor and magnetic components of electronic equipment; Automobile Sensor, Solar Inverter, Smart Home

       

    WeldingSpot welding is firm and smooth, and does not weld through two layers
    Windingwinding is tight, the start and end of the sheet can not be turned up
    Planenesssurface unevenness is less than 0.1mm
    FinenessNo crystalline fine particles (no crystalline fine particles on the cut surface)
    Cut faceNo obvious crack on the cutting face (no light transmission and peeling between layers)
    SurfaceVisually without burrs, rust, or deformation (to control deformation within tolerances)
    ProductsDo not contain Pb\Cd\Hg\Cr\PBBs\PBDEs



Leave Message
We look forward to assisting you. Please let us know how we can help you by completing the form below or just email to [email protected], we will reply you within 24hours.